Narda-ATM - Microwave RF Components Manufacturer

You are here: Home / Waveguide Components / Assemblies / Bends / Transitions / Double Ridge Bends / Miters

Double Ridge Bends / Miters

Double Ridge Waveguide Bends & Miters

E-Bends and H-Bends / Miters for Double Ridge Waveguide

ATM manufactures Double Ridge Waveguide Bend Assemblies specially designed for every customers unique requirements.  We manufacture either E-Bend or H-Bend or Miters for Double Ridge Waveguide units in custom lengths.

ATM also manufactures E-Bends and H-Bends / Miters for Rectangular Waveguide systems.

For more information call us and discuss your requirements for Double Ridge Waveguide Bends and Miters with one of our design engineers.

Double Ridge Waveguide E and H Bends & Miters
WG Size Freq (GHz) 90 Degree
E Bend		 90 Degree
H Bend		 90 Degree
E Miter Bend*		 90 Degree
H Miter Bend*
WRD250 2.6 - 7.8 250-500-4x4-C3-C3 250-510-4x4L-C3-C3 N/A N/A
WRD350 3.5 - 8.2 350-500-3x3-C3-C3 350-510-3x3-C3-C3 N/A N/A
WRD475 4.75 - 11.0 475-500-2.5x2.5-C3-C3 475-510-2.5x2.5-C3-C3 N/A N/A
WRD580 5.8 - 16.0 580-500-2x2-C3-C3 580-510-2x2-C3-C3 N/A N/A
WRD650 6.5 - 18.0 650-500-2x2-C3-C3 650-510-2x2-C3-C3 650-520-1.5x1.5-C3-C3 650-530-1.5x1.5-C3-C3
WRD750 7.5 - 18.0 750-500-2x2-C3-C3 750-510-2x2-C3-C3 750-520-0.94x0.94-C3-C3 750-530-0.94x0.94-C3-C3
WRD180 18.0 - 40.0 180-500-1x1-C3-C3 180-510-1x1-C3-C3 N/A N/A

* Replace "L" in above P/N with Length in Inches [or cm]