Rectangular Waveguide Information |
|---|
Raw Waveguide Info - Rectangular Waveguide
L3 Narda ATM can supply all your Waveguide needs for both rectangular waveguide and double ridge waveguide components.. As always, please feel free to call us and discuss your needs with one of our design engineers.
| Rectangular Waveguide and Flange Specifications | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EIA WG Size |
TYPE MIL-W -85C |
Part Dash No. M85/1 |
Freq Range (GHz) |
Mat'l | Inside Dimension |
Std Tol+/- | Outside Dimension |
Wall Thick- ness (nominal) |
Approx wt per foot |
Cut-Off for TE1,0 Mode |
Recommended Power Rating (at one atmosphere) |
Theoretical attenuation lowest to highest freq (dB/100ft) |
Cover Flange Type (ATM-6) |
Choke Flange Type (ATM-7) |
Contact Flange Type |
Non-Press Contact Flg. Type (ATM-3) |
Press Contact Flange | |||
| Freq (GHz -Sec) |
Wave Len (cm) |
CW (KW) |
peak (KW) |
Grooved (ATM-1) |
Flat Face(ATM-2) | |||||||||||||||
| WR650 | RG103/U | 018 019 |
1.12 - 1.70 | 1100 Al 6061 Al |
6.500x3.250 | .010 | 6.660x3.410 | .080 | 1.902 | .908 | 33.02 | 243.2 | 41340 | 0.273 - 0.180 | UG418A/U UG418B/U |
UG1343/U | UG1720/U | |||
| WR510 | RG337/U | 021 023 |
1.45 - 2.20 | Copper Bronze |
5.100x2.550 | .005 | 5.260x2.710 | .080 | 4.848 4.798 |
1.157 | 25.91 | 152.0 | 26190 | 0.296 - 0.201 | UG1718/U | UG1715/U | ||||
| WR510 | RG338/U | 025 026 |
1.45 - 2.20 | 1100 Al 6061 Al |
5.100x2.550 | .005 | 5.260x2.710 | .080 | 1.462 | 1.157 | 25.91 | 152.0 | 26190 | 0.446 - 0.303 | UG1719/U | UG1717/U | ||||
| WR430 | RG104/U | 027 031 |
1.70 - 2.60 | Copper Bronze |
4.300x2.150 | .008 | 4.460x2.310 | .080 | 4.099 4.036 |
1.375 | 21.84 | 95.0 | 18230 | 0.393 - 0.261 | UG435A/U | UG1344/U | UG1716/U | |||
| WR430 | RG105/U | 029 030 |
1.70 - 2.60 | 1100 Al 6061 Al |
4.300x2.150 | .008 | 4.460x2.310 | .080 | 1.267 | 1.375 | 21.84 | 95.0 | 18230 | 0.590 - 0.392 | UG437A/U UG437B/U |
UG1345/U | UG1711/U | |||
| WR340 | RG112/U | 033 037 |
2.20 - 3.30 | Copper Bronze |
3.400x1.700 | .005 | 3.560x1.860 | .080 | 3.262 3.212 |
1.737 | 17.27 | 58.5 | 11870 | 0.533 - 0.371 | UG553/U | UG1346/U | UG1712/U | |||
| WR340 | RG113/U | 035 036 |
2.20 - 3.30 | 1100 Al 6061 Al |
3.400x1.700 | .005 | 3.560x1.860 | .080 | 1.01 | 1.737 | 17.27 | 58.5 | 11870 | 0.801 - 0.557 | UG554/U | UG1347/U | UG1713/U | |||
| WR284 | RG48/U | 039 043 |
2.60 - 3.95 | Copper Bronze |
2.84-1.34 | .005 | 3.00x1.50 | .080 | 2.691 2.653 |
2.080 | 14.43 | 45.0 | 7650 | 0.742 - 0.508 | UG53/U | UG54B/U | UG65/U UG66/U |
UG1479/U CMR284 |
UG1348/U CPR284G |
UG1724/U CPR284F |
| WR284 | RG75/U | 041 042 |
2.60 - 3.95 | 1100 Al 6061 Al |
2.84-1.34 | .005 | 3.00-1.50 | .080 | .83 | 2.080 | 14.43 | 36.0 | 7650 | 1.116 - 0.764 | UG584/U | UG585A/U | UG1484/U CMR284 |
UG1349/U CPR284G |
UG1725/U CPR284F |
|
| WR284 | RG109/U | 153 | 2.60 - 3.95 | Copper Bronze |
2.84-1.004 | .005 | 3.000x1.164 | .080 | 2.483 2.445 |
2.080 | 14.43 | 32.2 | 5720 | 1.131 - 0.947 | UG509/U UG510/U |
|||||
| WR284 | RG375/U Heavy Wall |
M85/2-001 M85/2-002 M85/2-004 |
2.60 - 3.95 | 1100Al 6061Al 6063Al |
2.84-1.34 | .005 | 3.238-1.738 | .199 | 2.132 | 2.080 | 14.43 | 24.0 | 3880 | 1.784 - 1.348 | UG584/U Modified |
UG585A/U Modified |
Special | Special | ||
| WR229 | RG340/U | 045 049 |
3.30 - 4.90 | Copper Bronze |
2.290x1.145 | .005 | 2.418x1.273 | .064 | 1.768 1.740 |
2.577 | 11.63 | 30.0 | 5480 | 0.946 - 0.671 | CMR229 | UG1350/U | UG1726/U | |||
| WR229 | RG341/U | 047 048 |
3.30 - 4.90 | 1100 Al 6061 Al |
2.290x1.145 | .005 | 2.418x1.273 | .064 | .533 | 2.577 | 11.63 | 24.0 | 5480 | 1.422 - 1.009 | CMR229 | UG1351/U | UG1727/U | |||
| WR187 | RG49/U | 051 055 |
3.95 - 5.85 | Copper Bronze |
1.872x.872 | .005 | 2.00x1.00 | .064 | 1.424 1.402 |
3.156 | 9.500 | 18.0 | 3300 | 1.395 - .967 | UG149A/U | UG148C/U | UG1475/U CMR187 |
UG1352/U CPR187G |
UG1728/U CPR187F |
|
| WR187 | RG95/U | 053 054 |
3.95 - 5.85 | 1100 Al 6061 Al |
1.872x.872 | .005 | 2.00x1.00 | .064 | .44 | 3.156 | 9.500 | 14.5 | 3300 | 2.097 - 1.454 | UG407/U | UG406B/U | UG1480/U CMR187 |
UG1353/U CPR187G |
UG1729/U CPR187F |
|
| WR187 | RG95/U Heavy Wall |
M85/2-003 M85/2-005 |
3.95 - 5.85 | 1100 Al 6063/6061Al |
1.872x.872 | .005 | 2.172x1.172 | .150 | 1.07 | 3.155 | 9.500 | 14.0 | 3296 | 1.785 - 1.238 1.933 - 1.340 |
UG407/U Modified |
UG406B/U Modified |
||||
| WR159 | RG343/U | 057 061 |
4.90 - 7.05 | Copper Bronze |
1.590x.795 | .004 | 1.718x.923 | .064 | 1.247 1.227 |
3.705 | 8.092 | 15.0 | 2790 | 1.533 - 1.160 | CMR159 | UG1354/U CPR159G |
UG1730/U CPR159F |
|||
| WR159 | RG344/U | 059 060 |
4.90 - 7.05 | 1100 Al 6061 Al |
1.590x.795 | .004 | 1.718x.923 | .064 | .383 | 3.705 | 8.092 | 12.0 | 2790 | 2.334 - 1.744 | CMR159 | UG1355/U CPR159G |
UG1731/U CPR159F |
|||
| WR137 | RG50/U | 063 037 |
5.85 - 8.20 | Copper Bronze |
1.372x.622 | .004 | 1.500x.750 | .064 | 1.052 1.036 |
4.285 | 6.996 | 10.0 | 1980 | 1.987 - 1.562 | UG344/U | UG343B/U | UG150/U | UG1476/U CMR137 |
UG1356/U CPR137G |
UG1732/U CPR137F |
| WR137 | RG106/U | 065 066 |
5.85 - 8.20 | 1100 Al 6061 Al |
1.372x.622 | .004 | 1.500x.750 | .064 | .324 | 4.285 | 6.996 | 8.0 | 1980 | 2.955 - 2.348 | UG441/U | UG440B/U | UG1481/U CMR137 |
UG1357/U CPR137G |
UG1733/U CPR137F |
|
| WR137 | RG110/U | 154 | 5.85 - 8.20 | Copper Bronze |
1.372x.487 | .004 | 1.500x.615 | .064 | .986 .970 |
6.996 | 1980 | UG511/ UG512/U |
||||||||
| WR112 | RG51/U | 069 073 |
7.05 - 10.0 | Copper Bronze |
1.122x.497 | .004 | 1.250x.625 | .064 | .866 .852 |
5.260 | 5.700 | 6.0 | 1280 | 2.776 - 2.154 | UG51/U | UG52B/U | UG1477/U CMR112 |
UG1358/U CPR112G |
UG1734/U CPR112F |
|
| WR112 | RG68/U | 071 072 |
7.05 - 10.0 | 1100 Al 6061 Al |
1.122x.497 | .004 | 1.250x.625 | .064 | .26 | 5.260 | 5.700 | 4.8 | 1280 | 4.173 - 3.238 | UG138/U | UG137B/U | UG1482/U CMR112 |
UG1359/U CPR112G |
UG1735/U CPR112F |
|
| WR102 | RG320/U | 155 158 |
7.00 - 11.0 | Bronze Aluminum |
1.020x.510 | .005 | 1.148x.638 | .064 | .83 .27 |
5.786 | 5.182 | 5.0 4.0 |
1020 | 3.516 - 2.217 5.285 - 3.333 |
UG1493/U | UG1494/U | ||||
| WR90 | RG52/U | 075 079 |
8.20 - 12.4 | Copper Bronze |
.900x.400 | .003 | 1.00x.500 | .050 | .542 .533 |
6.560 | 4.572 | 3.0 | 760 | 4.238 - 2.995 | UG39/U | UG40B/U | UG1478/U CMR90 |
UG1360/U CPR90G |
UG1736/U CPR90F |
|
| WR90 | RG67/U | 077 078 |
8.20 - 12.4 | 1100 Al 6061 Al |
.900x.400 | .003 | 1.00x.500 | .050 | .165 | 6.560 | 4.572 | 2.4 | 760 | 6.506 - 4.502 | UG135/U | UG136B/U | UG1483/U CMR90 |
UG1361/U CPR90G |
UG1737/U CPR90F |
|
| WR75 | RG346/U | 081 085 |
10.0 - 15.0 | Copper Bronze |
.750x.375 | .003 | .850x.475 | .05 | .475 .467 |
7.847 | 3.820 | 2.8 | 620 | 5.121 - 3.577 | WR75 | WR75 | ||||
| WR75 | RG347/U | 083 084 |
10.0 - 15.0 | 1100 Al 6061 Al |
.750x.375 | .003 | .850x.475 | .05 | .15 | 7.847 | 3.820 | 2.2 | 620 | 7.698 - 5.377 | WR75 | WR75 | ||||
| WR62 | RG91/U | 087 089 |
12.4 - 18.0 | Copper Bronze |
.622x.311 | .002 | .702x.391 | .04 | .313 .308 |
9.490 | 3.160 | 1.8 | 460 | 6.451 - 4.743 | UG419/U | UG541A/U | ||||
| WR62 | RG107/U | 093 | 12.4 - 18.0 | Silver | .622x.311 | .002 | .702x.391 | .04 | 4.5 oz | 9.490 | 3.160 | 1.5 | 457 | 6.910 - 5.079 | UG419/U | UG541A/U | ||||
| WR62 | RG349/U | 090 091 |
12.4 - 18.0 | 1100 Al 6061 Al |
.622x.311 | .002 | .702x.391 | .04 | .097 | 9.490 | 3.160 | 1.4 | 460 | 9.700 - 7.131 | UG1665/U | UG1666/U | ||||
| WR51 | RG351/U | 097 098 |
15.0 - 22.0 | 1100 Al 6061 Al |
.510x.255 | .0025 | .590x.335 | .04 | .084 | 11.54 | 2.598 | 1.0 | 310 | 13.250 - 9.598 | WR51 | WR51 | ||||
| WR51 | RG352/U | 094 | 15.0 - 22.0 | Copper | .510x.255 | .0025 | .590x.335 | .04 | .262 | 11.54 | 2.598 | 1.2 | 310 | 8.812 - 6.384 | WR51 | WR51 | ||||
| WR51 | RG353/U | 096 | 15.0 - 22.0 | Bronze | .510x.255 | .0025 | .590x.335 | .04 | .258 | 11.54 | 2.598 | 1.2 | 312 | 13.08 - 9.477 | WR51 | WR51 | ||||
| WR42 | RG53/U | 100 102 |
18.0 - 26.5 | Copper Bronze |
.420x.170 | .002 | .500x.250 | .04 | .206 .203 |
14.08 | 2.134 | 0.8 | 170 | 13.80 - 10.13 | UG595/U | UG596A/U | UG425/U | |||
| WR42 | RG66/U | 106 | 18.0 - 26.5 | Silver | .420x.170 | .002 | .500x.250 | .04 | 3.2 oz | 14.05 | 2.134 | 0.7 | 170 | 14.77 - 10.85 | UG595/U | UG596A/U | UG425/U | |||
| WR42 | RG121/U | 103 104 |
18.0 - 26.5 | 1100 Al 6061 Al |
.420x.170 | .002 | .500x.250 | .04 | .065 | 14.08 | 2.134 | 0.6 | 170 | 20.74 - 15.23 | UG597/U | UG598A/U | ||||
| WR34 | RG354/U | 107 109 |
22.0 - 33.0 | Copper Bronze |
.340x.170 | .002 | .420x.250 | .04 | .183 .181 |
17.28 | 1.735 | 0.6 | 140 | 16.86 - 11.73 | UG1530/U | |||||
| WR34 | RG355/U | 110 111 |
22.0 - 33.0 | 1100 Al 6061 Al |
.340x.170 | .002 | .420x.250 | .04 | .055 | 17.28 | 1.735 | 0.5 | 140 | 25.35 - 17.63 | UG1530/U | |||||
| WR34 | RG357/U | 113 | 22.0 - 33.0 | Silver | .340x.170 | .002 | .420x.250 | .04 | .055 | 17.28 | 1.735 | 0.5 | 140 | 16.18 - 11.25 | UG1530/U | |||||
| WR28 | RG96/U | 114 | 26.5 - 40.0 | Silver | .280x.140 | .0015 | .360x.220 | .04 | 2.5 oz | 21.10 | 1.422 | UG599/U | UG600A/U | UG381/U | ||||||
| WR28 | 117 | 26.5 - 40.0 | Copper | .280x.140 | .0015 | .360x.220 | .04 | .153 | 21.10 | 1.422 | 0.5 | 100 | 23.02 - 15.77 | UG599/U | UG600A/U | UG381/U | ||||
| WR28 | 26.5 - 40.0 | 1100 Al 6061 Al |
.280x.140 | .0015 | .360x.220 | .04 | .048 | 21.10 | 1.422 | 0.4 | 100 | 34.46 - 23.59 | ||||||||
| WR22 | RG97/U | 118 | 33.0 - 50.0 | Silver | .224x.112 | .001 | .304x.192 | .04 | 2 oz | 26.35 | 1.138 | UG383/U | UG1521/U | |||||||
| WR22 | RG272/U | 119 121 |
33.0 - 50.0 | Copper Bronze |
.224x.112 | .001 | .304x.192 | .04 | .129 .128 |
26.35 | 1.138 | 0.4 | 60 | 32.44 - 22.05 | UG383/U | |||||
| WR19 | RG358/U | 122 124 |
40.0 - 60.0 | Copper Bronze |
.188x.094 | .001 | .268x.174 | .04 | .112 .111 |
30.69 | .956 | 0.3 | 50 | 39.81 - 28.60 | UG383/U Modified |
UG1529/U | ||||
| WR15 | RG98/U | 125 | 50.0 - 75.0 | Silver | .148x.074 | .001 | .228x.154 | .04 | 1.5 oz | .752 | UG385/U | UG1523/U | ||||||||
| WR15 | RG273/U | 126 128 |
50.0 - 75.0 | Copper Bronze |
.148x.074 | .001 | .228x.154 | .04 | .094 .093 |
.752 | UG385/U | |||||||||
| WR12 | RG99/U | 129 | 60.0 - 90.0 | Silver | .122x.061 | .0005 | .202x.141 | .04 | 1.33 oz | .620 | UG387/U | UG1522/U | ||||||||
| WR12 | RG274/U | 130 132 |
60.0 - 90.0 | Copper Bronze |
.122x.061 | .0005 | .202x.141 | .04 | .085 .081 |
.620 | UG387/U | |||||||||
| WR10 | RG359/U | 133 135 |
75.0 - 110.0 | Copper Bronze |
.100x.050 | .0005 | .180x.130 | .04 | .071 .070 |
.508 | UG387/U Modified |
UG1528/U | ||||||||
| WR8 | RG278/U | 136 138 |
90.0 - 140.0 | Copper Bronze |
.080x.040 | .0003 | .140x.100 | .03 | .042 .041 |
.406 | UG387/U Modified |
UG1527/U | ||||||||
| WR6 | RG276/U | 139 141 |
110.0-170.0 | Copper Bronze |
.065x.0325 | .00025 | .125x.0925 | .03 | .037 0.36 |
.330 | UG1525/U | |||||||||
| WR5 | RG275/U | 142 144 |
140.0 - 220.0 | Copper Bronze |
.051x.0255 | .00025 | .111x.0855 | .03 | .032 .031 |
.259 | UG1524/U | |||||||||
| WR4 | RG277/U | 145 147 |
170.0 - 260.0 | Copper Bronze |
.043x.0215 | .0002 | .103x.0815 | .03 | .029 .028 |
.218 | UG1526/U | |||||||||
| WR3 | RG279/U | 220.0 - 325.0 | Copper Bronze |
.034x.017 | .0002 | .094x.077 | .03 | .026 .025 |
.173 | |||||||||||
| EIA WG Size |
TYPE MIL-W -85C |
Part Dash No. M85/1 |
Freq Range (GHz) |
Mat'l | Inside Dimension |
Std Tol+/- | Outside Dimension |
Wall Thick- ness (nominal) |
Approx wt per foot |
Freq (GHz -Sec) |
Wave -Len (cm) |
CW (KW) |
peak (KW) |
Theoretical attenuation lowest to highest freq (dB/100ft) |
Cover Flange Type (ATM-6) |
Choke Flange Type (ATM-7) |
Contact Flange Type |
Non-Press Contact Flg. Type(ATM-3) |
Grooved (ATM-1) |
Flat Face(ATM-2) |
| Cut-Off for TE1,0 Mode |
Recommended Power Rating (at one atmosphere) |
Press Contact Flange | ||||||||||||||||||