Narda-MITEQ - Microwave RF Components Manufacturer

You are here: Home / Ka-Band Components / Ka-Band Waveguide / Combiner Divider 3dB Hybrid

Combiner Divider 3dB Hybrid

3dB Hybrid Dividers / Combiners for Ka-Band

3dB Short Slot Hybrid Dividers / Combiners

Narda-MITEQ manufactures Waveguide Short Slot Hybrid Combiners/Dividers in a choice of configurations. These units are useful in applications where smaller sizes are required.

For applications where full band width is needed or for uneven power distribution of values other than 3dB, Narda-MITEQ manufactures Broadwall Coupler Combiners / Dividers which utilize a multi-hole coupler design resulting in full band width. Please call us and discuss your needs for waveguide power dividers / combiners with our design engineers.

3dB Short Slot Hybrid Combiner/Divider
Ka-Band, Downlink 18.3 - 20.2 GHz, Uplink 27.5 - 31.0 GHz
 
3dB Waveguide Short Slot Hybrid Combiner / Divider - Style X
3dB Waveguide Short Slot Hybrid Combiner / Divider - Style X
  Hybrid Waveguide Combiner / Divider - Style W for Ka-Band     Hybrid Waveguide Combiner / Divider - Style X for Ka-Band
 
Waveguide Short Slot 3dB Hybrid Divider / Combiner - Style Z
Waveguide Short Slot 3dB Hybrid Divider / Combiner - Style Z
  Hybrid Waveguide Combiner / Divider - Style Y For Ka-Band Hybrid Waveguide Combiner / Divider - Style Z For Ka-Band 
Note 1: If F1 is input, then F3 and F4 are 3dB nominal and F2 is isolated from F1.
WG Size Freq. (GHz) VSWR
max		 Iso.
min		 Balance
dB+/- (max)		 Standard
Model No.*		 Outline
Drawing
 WR51 18.3 - 20.2  1.15 26 0.25  51ka-265A-Z-6-6-6-6  
 WR42 18.3 - 20.2  1.15 26 0.25  42ka-265A-Z-6-6-6-6  Dwg
 WR34 27.5 - 31.0  1.15 26 0.25  34ka-265A-Z-6-6-6-6  Dwg
 WR28 27.5 - 31.0  1.15 26 0.25  28ka-265A-Z-6-6-6-6  Dwg
Ordering Information
3dB Hybrid Waveguide Combiner / Divider for Ka-Band
 WR -Mod M -S -F1 -F2 -F3 -F4
Example part number:  42 -263ka A -Z -6 -6 -6 -6
Waveguide Size: (WR)
WR28 thru WR51 available		              
Basic Model No.: (-Mod)            
Material (M): A=Aluminum, B=Copper/Brass          
Style (-S): W, X, Y, or Z config. See illustrations above          
Flange 1 (-F1): 6=Cover, 7=Choke      
Flange 2 (-F2): 6=Cover, 7=Choke      
Flange 3 (-F3): 6=Cover, 7=Choke  
Flange 4 (-F4): 6=Cover, 7=Choke
See Narda-MITEQ Standard Flange page for more info.		      

* The Standard Model Numbers above are the most common parts ordered for size, material and flange.

However, these models can easily be altered for your needs by using the Model # code system to the left

For 3dB Hybrid Waveguide Divider / Combiners covering other frequencies, visit our X Band Waveguide Combiner Divider page which covers frequencies from 2.66 GHz thru 40.0 GHz.