Adapters,

Waveguide to Waveguide

   See Also:
Adapters, W/G to Coax, Endlaunch
Adapters, W/G to Coax, Right Angle
W/G Assemblies

ATM manufactures Waveguide to Waveguide Adapters covering a full frequency range for Rectangular Waveguides, with multiple flange configurations available.  For more information feel free to call us and discuss your needs with one of our design engineers.

 

ATM offers a wide variety of transitions ranging from standard rectangular waveguide adapters in overlapping bands to custom adapters spanning multiple bands.  Please call us and discuss your needs with one of our design engineers.

  

Rectangular to Rectangular

 Adapters in Overlapping Bands

WG Size Optimum Freq Range GHz Insertion
Length (In)*		 VSWR Standard Model
Number
WR340 to WR430 2.20 - 2.60 13.0 1.05 340/430-13-2-2
WR284 to WR340 2.60 - 3.30 11.5 1.05 284/340-11.5-6-2
WR229 to WR284 3.30 - 3.95 11.0 1.05 229/284-11-2-6
WR187 to WR229 3.95 - 4.90 10.0 1.05 187/229-10-6-2
WR159 to WR187 4.90 - 5.85 9.0 1.05 159/187-9-2-6
WR137 to WR159 5.85 - 7.05 6.0 1.10 137/159-6-2-2
WR137 to WR159 5.85 - 7.05 8.0 1.05 137/159-8-2-2
WR112 to WR137 7.05 - 8.20 6.0 1.05 112/137-6-6-2
WR102 to WR112 7.00 - 10.0 6.0 1.05 102/112-6-6-6
WR90 to WR112 8.20 - 10.0 6.0 1.08 90/112-6-6-6
WR90 to WR102 8.20 - 11.0 6.0 1.08 90/102-6-6-6
WR75 to WR90 10.0 - 12.4 5.0 1.08 75/90-5-6-6
WR62 to WR75 12.4 - 15.0 2.0 1.17 62/75-2-6-6
WR62 to WR75 12.4 - 15.0 4.0 1.08 62/75-4-6-6
WR51 to WR62 15.0 - 18.0 2.0 1.17 51/62-2-6-6
WR51 to WR62 15.0 - 18.0 4.0 1.08 51/62-4-6-6
WR42 toWR51 18.0 - 22.0 2.0 1.17 42/51-2-6-6
WR42 toWR51 18.0 - 22.0 4.0 1.10 42/51-4-6-6
WR34 to WR42 22.0 - 26.5 2.0 1.17 34/42-2-6-6
WR34 to WR42 22.0 - 26.5 4.0 1.10 34/42-4-6-6
WR28 to WR34 26.5 - 33.0 4.0 1.17 28/34-4-6-6
WR22 to WR28 33.0 - 40.0 2.0 1.17 22/28-2-6-6
Ordering Information

   Typical Part#:     SmallerWGSize/LargerWGSize -Length(In) -SmallerFlange -LargerFlange
It is possible to change the flanges on the standard model number, but the order you specify them in is important.  The first flange corresponds to the smaller WG size and the second flange corresponds to the larger WG size.  In order to change the length of a standard model consult factory for more information.

 

Example:  P/N 284/340-11.5-6-2 is a:

WR284 to WR340 transition -11.5 inches long - Cover flange on WRD284 - CPRF flange on WG340

 

See ATM Flange page for more information on flanges.

*Size may vary due to flange combination selected.

 

Double Ridge to Rectangular

 Adaptors in Overlapping Bands
other models available consult factory for details
WG Size Optimum Freq.
 Range (GHz)		 Insertion
Length (In)		 VSWR
max		 Standard Model Number
WRD250 to WR284 2.60 - 3.95 13.5 1.15 250/284-13.5-C3-6
WRD250 to WR187 3.95 - 5.85 11.0 1.15 250/187-11-C3-6
WRD250 to WR159 4.90 - 7.05 10.0 1.15 250/159-10-C3-2
WRD350 to WR159 4.90 - 7.05 9.0 1.15 350/159-9-C3-2
WRD350 to WR137 5.85 - 8.20 8.0 1.15 350/137-8-C3-2
WRD475 to WR137 5.85 - 8.20 8.0 1.15 475/137-8-C3-2
new as of 12.03.10 WRD475 to WR187 4.75 - 5.85 11.0 1.15 475/187-11-C3-6
WRD475 to WR112 7.05 - 10.0 6.5 1.15 475/112-6.5-C3-6
new as of 12.03.10 WRD475 to WR90 8.20 - 11.0 8.0 1.15 475/90-8-C3-6
WRD580 to WR159 5.80 - 7.05 6.0 1.15 580/159-6-C3-2
WRD580 to WR137 5.90 - 8.40 4.0 1.25-1.35 580/137-4-C3-2
WRD580 to WR137 5.85 - 8.40 5.5 1.25 580/137-5.5-C3-2
WRD580 to WR112 7.05 - 10.0 4.0 1.15 580/112-4-C3-6
WRD580 to WR102 7.00 - 11.0 5.0 1.15 580/102-5-C3-6
WRD580 to WR90 8.20 - 12.4 5.0 1.15 580/90-5-C3-6
WRD580 to WR75 10.0 - 15.0 4.0 1.15 580/75-4-C3-6
WRD580 to WR62 12.4 - 16.0 4.0 1.15 580/62-4-C3-6
WRD580 to WR51 15.0 - 16.0 4.0 1.15 580/51-4-C3-6
WRD650 to WR159 6.50 - 7.05 6.0 1.25 650/159-6-C3-2
WRD650 to WR137 6.50 - 8.20 6.0 1.15 650/137-6-C3-2
WRD650 to WR112 7.05 - 10.0 5.5 1.15 650/112-5.5-C3-6
WRD650 to WR102 7.00 - 11.0 5.0 1.15 650/102-5-C3-6
WRD650 to WR90 8.20 - 12.4 5.0 1.15 650/90-5-C3-6
WRD650 toWR75 10.0 - 15.0 4.5 1.15 650/75-4.5-C3-6
WRD650 to WR62 12.4 - 18.0 4.0 1.15 650/62-4-C3-6
WRD650 to WR51 15.0 - 18.0 4.0 1.15 650/51-4-C3-6
WRD750 to WR137 7.50 - 8.2 5.0 1.15 750/137-5.0-C3-2
WRD750 to WR112 7.50 - 10.0 4.5 1.15 750/112-4.5-C3-6
WRD750 to WR102 7.50 - 11.0 4.5 1.15 750/102-4.5-C3-6
WRD750 to WR90 8.20 - 12.4 4.0 1.15 750/90-4-C3-6
WRD750 to WR90 8.20 - 12.4 4.5 1.15 750/90-4.5-C3-6
WRD750 to WR75 10.0 - 15.0 4.5 1.15 750/75-4.5-C3-6
WRD750 to WR62 12.4 - 18.0 4.0 1.15 750/62-4-C3-6
WRD750 to WR51 15.0 - 18.0 4.0 1.15 750/51-4-C3-6

WRD180 to WR42

18.0 - 26.5

 1.5 1.20

180/42-1.5-C3-6

WRD180 to WR28

 26.5 - 40.0 1.5 1.20

180/28-1.5-C3-6

WRD180 to WR28

 26.5 - 40.0 1.0 1.20

180/28-1.0-C3-6

Ordering Information

           Typical Part#:       WRD#/WR# -Length(In) -Double Ridge Flange -Rectangular Flange
      

                                                 
It is possible to change the flanges on the standard model number, but the order you specify them in is important.  The first flange corresponds to the double ridge WG and the second flange corresponds to the rectangular WG.  In order to change the length of a standard model consult factory for more information.

 

Example:  P/N 250/284-12-C3-6 is a:

WRD250 to WR284 transition - 12 inches long - Cover w/thru holes on WRD250 - Cover Flange on WG284

 

See ATM Flange page for more information on flanges.

 

Double Ridge to Double Ridge

 Adaptors in Overlapping Bands
other models available consult factory for details
WG Size Optimum Freq
Range GHz		 Insertion
 Length (In)		 VSWR
max		 Standard Model Number
WRD250 to WRD350 3.50 - 7.80 8.0 1.15 250/350-8-C3-C3
WRD475 to WRD500 5.00 - 11.0 6.5 1.15 475/500-6.5-C3-C3
WRD475 to WRD580 5.80 - 11.0 6.5 1.15 475/580-6.5-C3-C3
WRD475 to WRD650 6.50 - 11.0 6.5 1.15 475/650-6.5-C3-C3
WRD475 to WRD750 7.50 - 11.0 6.5 1.15 475/750-6.5-C3-C3
WRD500 to WRD580 5.80 - 16.0 6.0 1.15 500/580-6-C3-C3
WRD500 to WRD650 6.50 - 18.0 4.0 1.15 500/650-4-C3-C3
WRD500 to WRD650 6.50 - 18.0 6.0 1.15 500/650-6-C3-C3
WRD500 to WRD750 7.50 - 18.0 6.0 1.15 500/750-6-C3-C3
WRD580 to WRD650 6.50 - 16.0 6.0 1.15 580/650-6-C3-C3
WRD580 to WRD750 7.50 - 16.0 6.0 1.15 580/750-6-C3-C3
WRD650 to WRD750 7.50 - 18.0 6.0 1.15 650/750-6-C3-C3

Ordering Information

          Typical Part#:     SmallerWGSize/LargerWGSize -Length(In) -SmallerFlange -LargerFlange
   

It is possible to change the flanges on the standard model number, but the order you specify them in is important.  The first flange corresponds to the double ridge WG and the second flange corresponds to the rectangular WG.  In order to change the length of a standard model consult factory for more information.

 

Example:  P/N 250/350-8-C3-6 is a:

WRD250 to WRD350 transition -8 inches long - Cover w/thru holes on WRD250 - Cover Flange on WRD350

 

See ATM Flange page for more information on flanges.

 

 

Rectangular to Rectangular

 Adaptor Specials
other models available consult factory for details
WG Size Insertion
 Length (In)		 Standard Model
Number
WR28 to WR90 8.0 28/90-8-6-6
new as of 04.03.11 WR42 to WR62 6.0 42/62-6-6-6
WR42 to WR90 8.0 42/90-8-6-6
WR62 to WR90 6.0 62/90-6-6-6
WR75 to WR112 4.69 75/112-4-6-6
WR75 to WR187 12.0 75/187-12-6-2
WR90 to WR137 10.0 90/137-10-6-2
WR90 to WR187 11.0 90/187-11-6-2
WR90 to WR284 12.0 90/284-12-6-2
WR137 to WR187 5.38 137/187-5.375-2-2
WR137 to WR284 10.0 137/284-10-2-2
WR187 to WR284 12.0 187/284-12-2-2

 

Home | Coaxial Components | Waveguide Components | Catalog | Ordering Info | Sales Representatives | Contact Us | Request a Quote

Advanced Technical Materials Inc
49 Rider Avenue
Patchogue, NY 11772

  

Voice: (631) 289-0363
Fax: (631) 289-0358
Email: atm@atmmicrowave.com
URL: http://www.atmmicrowave.com
©2001-2007 Advanced Technical Materials, Inc. All Rights Reserved.