|
AV06 CVA mounted to a motor drive
Motor Drive Outline
Drawings: 06,
07,
08 |
GENERAL SPECIFICATIONS
( MOTOR DRIVE UNIT ONLY)
|
|
Electrical
Motor Drive Connector: 9-Pin D-Sub
(male)
Voltage:
18-30VDC
Max. Amperage:
250mA & 600mA starting
Mechanical
Body: Aluminum Construction
Operating Temp:
Finish:
Unique corrosion resistant 316 stainless steel epoxy coating
IAW
MIL-F-14072 |
-
ATM's motor driven variable attenuators utilize DC motors with integrated, long
life gear reductions ideal for High Reliability applications.
-
The unit will
operate with a set DC voltage between 18-30VDC, commonly found in most
systems or by a separate DC power supply. Motor speed will vary based on
Voltage used. Maximum running current is 250mA & 600mA max starting.
-
To
prevent motor damage, Micro switches are used to stop the motor at the
minimum and maximum travel positions
-
Units are provided with 9 pin D Sub Male connectors allowing for control
voltage, end point indication if desired, and follower potentiometer. See
connector pin-out.
-
These devices are best controlled by an external Double-Pole/Double-Throw
(DPDT) switch or ATM optional control module.
-
Any one of ATM's Continuously Variable
Attenuators
can be mounted to a motor drive.
-
For Motor Drive
Option add -28 to any of the
06, 07,
08, Medium, &
High Power attenuators
Example:
AF064-10
= AF064-10-28
|
|
Motor Characteristics:
1. Motor Control Voltage
Pins 2 and 7 of the nine pin D Sub male connector will have fixed DC voltage
between 18-30 volts applied. To increase attenuation pin 2 is - and pin 7 is +.
To reverse the direction 2 is + and 7 is -. In both directions a stop
is provided by means of Micro switches.
2. End Point Indicator
*
The switch is also used to provide end point indication by means of pins 1
and 6 developing a voltage when the device has reached the maximum limit,
(for 2+ and 7-). Pins will 3 and 8 will develop a voltage when a minimum
limit is met. (for 2- and 7+). The developing voltage is equal to supply
voltage used.
3. Follower Potentiometer
**
A 10K Pot with an output proportional to the position of the motor drive
mechanism is available at pins 4, 5, and 9. |
|
Motor Pin-Out
 |
|
Pin # |
Function |
|
-
2 |
Increase Attenuation |
|
+
7 |
|
+
2 |
Decrease Attenuation |
|
-
7 |
|
+
1 |
* End Point Indicator
(Max.) |
|
6 |
|
-
3 |
* End Point Indicator
(Min.) |
|
8 |
|
** 10K Follower Potentiometer |
|
4 |
Pot End Points |
|
9 |
|
5 |
Wiper |
|
|
Atm Optional Control Module:
An External Drive Module part number MCM-001 shown at right, is available
for the motor drive as an optional accessory. It includes:
1. Crisp tactile switches to control drive.
2. Max/Min position indicator lights.
3. Follower potentiometer terminals.
4. Self-switching power supply with input of 120 VAC - 240VAC.*
5. 6 Ft, 9 pin cable to interconnect the control box to the motor driven
device.
*If supplied power source is not used, an input of 18-30 VDC through the 9
pin connector may be substituted. |
 |
